This adapter plate kit features our new Adjustable Angle Riders. These risers will allow for bar adjustments from 5 degrees forward with zero rise to 5 degrees down. This is accomplished via an eccentric insert inside the rise that allows for Unlimited adjustments within the range.Our new Ducati Monster 696/796/1100 adapter plate bolts directly to the stock handlebar mount keeping all of the stock clearances- while putting your hands in a more natural position. You now have the option to flip your adapter plate upside down- which results in a more aggressive riding position that improves both traction and feel. This setup allows the use of multiple risers giving you the ability to custom tailor the bar height for optimum comfort.Each plate is machined from tough billet aluminum giving your bike a custom look while making them much stronger than the stock handlebars. The handlebar tubes are kept as separate pieces allowing for inexpensive replacement in the event of a crash.Our exclusive design will set your bike apart at the race track or your local bike night.Note: If the plate is used in the flipped position- a 10mm Spacer Kit (sold separately) is required to use a 1.5 inch or 2 inch riser. Longer cables will be needed if using 2 inch rise or above. 1 inch rise in the UP position will work without problems- the 1.5 inch riser is very tight with the stock parts and anything 2"" or more will certainly require extended cables and brake lines.